A program that doesn't ask for or use default values for these parameters simply doesn't account for baffle diffraction step.ī) Mutual coupling between any possible pair of bass sources (either woofer driver or port) creates a small and slowly varying 'error' response with respect to conventional Thiele-Small-Margolis computation, mainly below 120Hz and with a rather small dB amplitude (less than 1dB). They need all external enclosure dimensions and exact driver/port locations. Algorithms that evaluate it are slow and rather big for online implementation. It is therefore not a good idea to neglect this factor. If we use these simplified equations as a reference for the computation of SPL responses, it is worth noting that:Ī) Edge diffraction adds an 'error' of 3 to 6 dB over the range of 600 to 20Hz in an approximately uniform and definitely slowly changing manner. early 2015) are only an online computation of simple Thiele-Small-Margolis equations of the late seventies at which none of these factors was accounted for. Most software implementations available today (ie. For this they should include the following effects:ī) mutual coupling between bass drivers and ports,Ĭ) the formation of standing wave modes within the enclosure andĭ) the presence of sound absorbing material.įactors a,c and d have a strong impact and can't be neglected. These responses should be as accurate as possible. Ideally such a software should evaluate the SPL response of the bass drivers and the ports -if any- at a nearby reference point (usually on tweeter axis at 1m) for a frequency range of 20 to 1000Hz.

The optimum amount of sound absorbing material is also expected to be determined.

Such a geometry includes the box and the ports -if any- as well. An enclosure design software is supposed to help a designer calculate the optimum dimensions of the predefined geometry of a speaker cabinet.

Speaker enclosure design program